1. Loose Connections + Heat = Wasted Energy or a Fire

Fires and unscheduled downtime can cost you hundreds to thousands
per hour. Many of these electrical fires could be avoided by correcting poor design, workmanship, and faulty components long before they become a serious problem. Thermal Imaging takes a picture and shows you where the “hot spots” or loose connections are so they can be corrected. These “hot spots” are not visible to the human eye. Thermal Imaging detects them with the rise in temperature caused by these loose connections.

2. More Light, Less Cost

With the 2010 electric deregulation rapidly approaching, many businesses overhead costs will increase dramatically. A simple way to decrease lighting cost is to install high-efficiency light fixtures.

“We saved $466 on our electric bill in the first month!”
- Scott Miller - Engineering Director

3. Only Light Rooms in Use

Tired of lights being left on in the lunchroom or bathroom? An occupancy or motion sensor are devices that turn lights and other equipment on/off in response to people in the defined area. These sensors have a variety of adjustment capabilities. The most effective use for these devices is areas that are used infrequently. They can save you up to 50%! The type of sensor you need depends on where you are placing the device, coverage area, and compatibility.

4. High-Efficiency Heating & Air Systems

Most of the new heating & cooling equipment boasts energy saving technology, but a Dual Fuel or Energy Star System gives you the highest efficiency and lowest operating costs.
A high-efficiency system allows you to enjoy the benefits of
a new unit, while saving money on your energy costs.

5. Dirty Coils = $$$

Dirty systems can cost up to 30% more to operate than well maintained systems. You don’t even have to do anything! With SECCO Planned Maintenance we contact you to
schedule your maintenance, so you can focus on your business.

Routine maintenance on your heating & cooling equipment extends the life of the unit, spots small problems before they become large, and improves operating efficiency.... ultimately saving YOU money.

6. Set Temperature Back, SAVE Money

By turning the thermostat back 10-15 degrees for 8 hours you can save 10 percent on your heating & cooling bill. You can adjust the times you turn on the heating or air-conditioning according to a pre-set schedule. You can always override the pre-set schedule.

7. This Room is TOO COLD, This Room is TOO HOT

Are you constantly adjusting the thermostat temperature to keep everyone happy? This constant temperature adjustment causes your system to be less efficient and more prone to failure. Zoning for commercial buildings makes even more sense as every person has their own idea of their comfort level. The top complaints in any office is its either TOO HOT or is TOO COLD. A zoning system delivers increased energy efficiency on any HVAC System. Zoning allows you to set back thermostats in zones not being used and prevents zones from being over heated or cooled while other zones are not yet comfortable.

8. Reduced Water Usage = Lower Operating Costs

Tired of wasting water, and paying the HUGE water bill that goes along with it? An Automatic Flush Urinal can save you up to 40% on your water bill. Not only will this device save you money but it also ensures that the urinals are always flushed, odor-free, and presentable. Also, reduce sick time by eliminating cross contamination from touching the handle and odors from the un-flushed fixture.